Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> I35 >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Brake Control System - VDC) >> Trouble Diagnosis - Introduction >> Control Unit Input/Output Signal Standard >> Standards Using A Circuit Tester And Oscilloscope

Standards Using A Circuit Tester And Oscilloscope

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Connect the connectors for the VDC/TCS/ABS control unit and actuator, and turn the ignition switch ON.
Fig 1: Standards Using Circuit Tester & Oscilloscope (1 Of 3)
G00793249Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Standards Using Circuit Tester & Oscilloscope (2 Of 3)
G00793250Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: Standards Using Circuit Tester & Oscilloscope (3 Of 3)
G00793251Courtesy of NISSAN MOTOR CO., U.S.A.