Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> I35 >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Brake Control System - TCS) >> On Board Diagnostic System Description >> Consult-II Inspection Procedure >> Data Monitor Procedure

Data Monitor Procedure

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 1: Displaying CONSULT-II START Screen
    G00793168Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 2: Displaying DIAGNOSIS SYSTEM SELECTION Screen
    G00793169Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
  7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
  8. Touch "START" on "SELECT MONITOR ITEM".
Fig 3: Displaying DIAGNOSIS MODE SELECTION Screen
G00793170Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals