Abs Actuator And Electric Unit (Control Unit): Installation
WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- After installation, refill brake fluid. Then bleed air. Refer to BLEEDING BRAKE SYSTEM
- Temporarily install actuator on the bracket.
- Tighten actuator ground cable.
- Connect brake pipes temporarily.
- Tighten fixing nuts.
- Tighten brake pipes.
- Connect harness connectors and battery cable.
- Install air cleaner and duct.