Inspection Procedure

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform DATA MONITOR (SPEC) mode in maximum scale display.

Perform Basic Inspection, BASIC INSPECTION .
Confirm that the testing conditions indicated above are met.
Select B/FUEL SCHDL, A/F ALPHA-B1, A/F ALPHA-B2 and MAS A/F SE-B1 in DATA MONITOR (SPEC) mode with CONSULT-II.
Make sure that monitor items are within the SP value.
If NG, go to Diagnostic Procedures, DIAGNOSTIC PROCEDURE .

Fig 1: Displaying CONSULT-II DATA MONITOR (SPEC) Screen
Courtesy of NISSAN MOTOR CO., U.S.A.