ECM Inspection Table

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground.

Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring the input/output voltage. Doing so may result in damage to the ECM's transistor. Use ground other than the ECM terminals, such as the ground.

Fig 1: Identifying ECM Terminals and Specifications (1 Of 10)

G00786450

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying ECM Terminals and Specifications (2 Of 10)

G00786451

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Identifying ECM Terminals and Specifications (3 Of 10)

G00786452

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Identifying ECM Terminals and Specifications (4 Of 10)

G00786453

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: Identifying ECM Terminals and Specifications (5 Of 10)

G00786454

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: Identifying ECM Terminals and Specifications (6 Of 10)

G00786455

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: Identifying ECM Terminals and Specifications (7 Of 10)

G00786456

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: Identifying ECM Terminals and Specifications (8 Of 10)

G00786457

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: Identifying ECM Terminals and Specifications (9 Of 10)

G00786458

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 10: Identifying ECM Terminals and Specifications (10 Of 10)

G00786459

Courtesy of NISSAN MOTOR CO., U.S.A.