Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> I35 >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Engine Control System) >> DTC P1124 & DTC P1126: Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P1124 Testing Condition:

Procedure For DTC P1124 Testing Condition:

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.

Before performing the following procedure, confirm that battery voltage is more than 8V. 

With CONSULT-II 

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select DATA MONITOR mode with CONSULT-II. See Figure .
  3. If DTC is detected, go to DIAGNOSTIC PROCEDURE  .

With GST 

Follow the procedure, With CONSULT-II.

scientia non olet · About Mike's Workshop Manuals