How To Change Hazard And Horn Reminder Mode

WARNING: This page is about a different variant/trim than selected.

With CONSULT-II

Hazard and horn reminder can be changed using "WORK SUPPORT" mode in "MULTI ANSWER BACK SET". Refer to "WORK SUPPORT ".

Without CONSULT-II

When LOCK and UNLOCK signals are sent from the key fob for more than 2 seconds at the same time, the hazard and horn reminder mode is changed and hazard warning lamp flashes and horn sounds as follows:

Fig 1: Changing Hazard And Horn Reminder Mode

Courtesy of NISSAN MOTOR CO., U.S.A.