Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> G35 4D Sedan, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Sedan >> G-Sensor >> Removal And Installation >> Removal >> A/T Model

A/T Model

  1. Remove center console. Refer to CENTER CONSOLE (A/T) .
  2. Disconnect harness connector.
  3. Remove installation bolts. Remove yaw rate/side G-sensor.
CAUTION:
  • Do not drop or strike yaw rate/side G-sensor, because it has little endurance to impact.
  • Do not use power tool etc., because yaw rate/side G-sensor is weak for the impact.
    Fig 1: Removing Yaw Rate/Side G-Sensor - A/T Model
    G02157931Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals