CONSULT-II Inspection Procedure

With ignition switch OFF, connect CONSULT-II to data link connector and turn ON ignition switch.

Fig 1: Locating Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".

Fig 2: Locating START Selection CONSULT-II Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "BCM" on "SELECT SYSTEM" screen.

Fig 3: Locating BCM Selection On SELECTION SYSTEM Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Select item to be diagnosed on "SELECT TEST ITEM" screen.

Fig 4: Locating Item Selection For Diagnose On SELECT TEST ITEM Screen
Courtesy of NISSAN MOTOR CO., U.S.A.