Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> G35 4D Sedan, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Sedan >> Trouble Diagnosis >> Consult-II Functions >> Data Monitor >> Operation Procedure

Operation Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on display.
  5. Touch "ABS" on display.
    NOTE: Just after starting engine, or turning ignition switch ON, "ABS" may not be displayed on system selection screen even if "START" is touched. In this case, start again from step  1 .
  6. Touch "DATA MONITOR".
  7. Return to monitor item selection screen, and touch any of "ECU INPUT SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU". Refer to DISPLAY ITEM LIST  .
  8. Touch "START".
  9. Screen of data monitor is displayed.
scientia non olet · About Mike's Workshop Manuals