Inspection After Installation
WARNING: This page is about a different variant/trim than selected.
- Check that the accelerator pedal moves smoothly within the whole operation range.
- Check that the accelerator pedal securely returns to the original position.
- For the electrical inspection of the accelerator pedal position sensor, refer to
"DTC P0226 APP SENSOR
",
"DTC P0227, P0228 APP SENSOR
" and
"DTC P1227, P1228 APP SENSOR
" (TYPE 1) or
"DTC P2122, P2123 APP SENSOR
",
"DTC P2127, P2128 APP SENSOR
" and
"DTC P2138 APP SENSOR
" (TYPE 2).CAUTION: When the harness connector of the accelerator pedal position sensor is disconnected, perform "Accelerator Pedal Released Position Learning". refer to "ACCELERATOR PEDAL RELEASED POSITION LEARNING " (TYPE 1) or "ACCELERATOR PEDAL RELEASED POSITION LEARNING " (TYPE 2).