Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> G35 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls System - DTCS P1148 Through P2138 - Coupe >> DTC P2122, P2123: App Sensor >> CONSULT-II Reference Value in Data Monitor Mode

CONSULT-II Reference Value in Data Monitor Mode

Specification data are reference values.

SPECIFICATION DATA AND REFERENCE VALUES

MONITOR ITEM CONDITION SPECIFICATION
ACCEL SEN1
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released 0.5 - 1.0V
Accelerator pedal: Fully depressed 4.0 - 4.7V
ACCEL SEN2 (1)
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released 0.3 - 1.2V
Accelerator pedal: Fully depressed 3.9 - 4.8V
CLSD THL POS
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differ from ECM terminal voltage.
scientia non olet · About Mike's Workshop Manuals