Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2003 >> FX45 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0550: Power Steering Pressure Sensor Circuit >> Component Inspection

Component Inspection

  1. Reconnect all disconnected harness connectors.
  2. Start engine and let it idle. Check voltage between ECM terminal No. 12 and ground under the following conditions:
    • Steering wheel is being turned: voltage should be .5-4.5 volts.
    • Steering wheel is not being turned: voltage should be .4-.8 volts.
    If voltage is not as specified, replace PSP sensor.
scientia non olet · About Mike's Workshop Manuals