Local Control Units (LCUs)
Turn ignition switch to LOCK position. Disconnect appropriate LCU harness connector. Ensure battery voltage exists at appropriate terminal at LCU harness connector with ignition switch in all positions. See LCU POWER SUPPLY CIRCUIT CHECK table. See Fig 4 or Fig 5 . If voltage is not as specified with ignition switch in appropriate position, repair power distribution circuit(s) as necessary. See WIRING DIAGRAMS.
LCU POWER SUPPLY CIRCUIT CHECK
| LCU No. | Terminal No. | Wire Color |
|---|---|---|
| 01 (Driver's Door Control Unit) | 13 | White/Red |
| 02 (Passenger's Door Control Unit) | 13 | White/Red |
| 03 (Right Rear Door Control Unit) | 17 | White/Red |
| 04 (Left Rear Door Control Unit) | 17 | White/Red |
| 05 (Multi-Remote Control Unit) | 2 | Pink |