Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 1992 >> Q45 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays & Solenoids >> Relays >> Safety Relay (M30)

Safety Relay (M30)

  1. Safety relay (Orange) is located at right kick panel. Remove relay from vehicle. Connect battery voltage to terminal No. 1 of relay. See Fig 1 .
  2. Connect terminal No. 2 of relay to ground. Using ohmmeter, ensure continuity does not exist between terminals No. 2 and 3.
  3. Reverse voltmeter power and ground leads. Continuity should now exist. If relay does not respond as indicated, replace relay.
Fig 1: Safety Relay Terminal ID (M30)
G90D15225Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals