IAU learning status inspection

Information 

• Digital key function works only when the learning states of IAU and BDC are learnt.
• You can confirm the learning status as below.

1. Connect the cable of diagnostic tools to the data link connector in driver side crash pad lower panel.
2. Select the "S/W Management" and "IAU-BDC learning status".

   Courtesy of HYUNDAI MOTOR AMERICA

3. Check the IAU learning status.

   Courtesy of HYUNDAI MOTOR AMERICA

   Mark	Description	Learning status
   Virgin	Initial state	Non-learning state
   Learnt	Learning completion state	Learning completion state
   Neutralized	Neutral state	Non-learning state