Accelerator Position Sensor (APS): Inspection
WARNING: This page is about a different car, the 2024 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the diagnostic tool on the Data Link Connector (DLC).
- Turn the ignition switch ON.
- Measure the output voltage of the APS 3 and 6 at C.T and W.O.T.
| Accelerator Position |
Output Voltage (V) |
| APS1 |
APS2 |
| C.T |
0.7 - 0.8 |
0.33 - 0.43 |
| W.O.T |
3.98 - 4.22 |
1.93 - 2.17 |