(Front Wheel Speed Sensor Removal And Installation)
ABBREVIATED PROCEDURE
| Work | H/W | Tightening torque N.m(kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the battery (-) terminal | - | - | - | - | - |
| 2 | Remove the front wheel and tires (Refer to Suspension System - "WHEEL ") |
- | - | - | - | - |
| 3 | Remove the front wheel guard (Refer to Body (Interior/Exterior/Electrical) - "WHEEL GUARD ") |
- | - | - | - | - |
| 4 | Disconnect the front wheel speed sensor | Bolt | 7.8 - 11.7 (0.8 - 1.2/5.8 - 8.6) | - | - | - |
| 5 | Remove the front wheel speed sensor line grommet | - | - | - | - | - |
| 6 | Remove the front wheel speed sensor line bracket | Bolt | 7.8 - 11.7 (0.8 - 1.2/5.8 - 8.6) | - | - | - |
| 7 | Remove the front wheel speed sensor line clips | Clip | - | - | - | - |
| 8 | Remove the front wheel speed sensor | - | - | - | - | - |
|
||||||
| Install in the reverse order of removal | Refer to appropriate service information | |||||