Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2024 >> Elantra N Line >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> ESC (Electronic Stability Control) System (Except HEV) >> ESC (Electronic Stability Control) Module >> Repair Procedures >> Adjustment >> Notes

Repair Procedures: Adjustment: Notes

Perform diagnostic procedure by using diagnostic device as shown below.

  1. Connect self-diagnosis connector (16pins) located under the driver side crash pad to self-diagnosis device, and then turn the self-diagnosis device after key is ON.
  2. Select the "vehicle model" and "ESP/ESC" on GDS vehicle selection screen, then select OK.
scientia non olet · About Mike's Workshop Manuals