Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2023 >> Tucson Plug-In Hybrid SEL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (PHEV) (8 Of 8) >> DTC P24BC-00: EVAP System Leak Detection Pump Pressure Sensor Circuit Intermittent >> DTC Information And Inspection >> Monitor Current Data

Monitor Current Data

  1. Ignition "OFF"
  2. Connect GDS to Data Link Connector (DLC).
  3. Ignition "ON" & Engine "ON"
  4. Warm up the engine to normal operating temperature.
  5. Monitor following parameters in "Current Data" with GDS.

    Specification:  As shown in the illustration

    G16170617Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals