Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2023 >> Kona N >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2022 Hyundai Kona N. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  1. Installation is reverse of removal.

    Rail Pressure Sensor Installation: 

    18.0 - 22.0 N.m (1.8 - 2.2 kgf.m, 13.3 - 16.2 lb-ft)

scientia non olet · About Mike's Workshop Manuals