Connector [B]
WARNING: This page is about a different car, the 2022 Hyundai Kona N. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal | Description |
|---|---|
| 1 | Chassis ground |
| 2 | Chassis ground |
| 3 | Battery power (B+) |
| 4 | Chassis ground |
| 5 | Battery power (B+) |
| 6 | Battery power (B+) |
| 7 | - |
| 8 | - |
| 9 | - |
| 10 | Brake switch [Test] signal input |
| 11 | - |
| 12 | - |
| 13 | - |
| 14 | Immobilizer communication line |
| 15 | - |
| 16 | Main relay control output |
| 17 | - |
| 18 | Purge Control Solenoid Valve (PCSV) control output |
| 19 | E-CVVT Relay control output |
| 20 | - |
| 21 | - |
| 22 | Injector (Cylinder #2) [High] control output |
| 23 | Injector (Cylinder #2) [Low] control output |
| 24 | - |
| 25 | - |
| 26 | - |
| 27 | Brake switch [Lamp] signal input |
| 28 | - |
| 29 | - |
| 30 | A/C Pressure Transducer (APT) signal input |
| 31 | Fuel tank pressure sensor (FTPS) signal input |
| 32 | LIN communication signal input |
| 33 | Fuel pump relay control output |
| 34 | Start motor relay control output |
| 35 | Cooling fan relay [High] control output |
| 36 | - |
| 37 | - |
| 38 | Canister close valve (CCV) control output |
| 39 | Injector (Cylinder #3) [High] control output |
| 40 | Injector (Cylinder #3) [Low] control output |
| 41 | Battery power (B+) |
| 42 | - |
| 43 | - |
| 44 | Sensor ground (Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]) |
| 45 | - |
| 46 | Sensor ground (Accelerator Position Sensor (APS) 2) |
| 47 | Sensor ground (Accelerator Position Sensor (APS) 1) |
| 48 | Sensor ground (Fuel Tank Pressure Sensor (FTPS)) |
| 49 | - |
| 50 | Sensor ground (A/C Pressure Transducer (APT)) |
| 51 | - |
| 52 | - |
| 53 | - |
| 54 | Engine speed signal output |
| 55 | - |
| 56 | Injector (Cylinder #4) [High] control output |
| 57 | Injector (Cylinder #4) [Low] control output |
| 58 | Heated Oxygen Sensor [Bank 1/Sensor 2] signal input |
| 59 | CCP-CAN [Low] |
| 60 | P-CAN [Low] |
| 61 | Start signal input |
| 62 | - |
| 63 | - |
| 64 | Accelerator Position Sensor (APS) #2 signal input |
| 65 | Accelerator Position Sensor (APS) #1 signal input |
| 66 | - |
| 67 | - |
| 68 | - |
| 69 | - |
| 70 | - |
| 71 | Cooling fan relay [Low] control output |
| 72 | Recirculation Control Solenoid Valve (RCV) control output |
| 73 | Injector (Cylinder #1) [High] control output |
| 74 | Injector (Cylinder #1) [Low] control output |
| 75 | Battery power (B+) |
| 76 | - |
| 77 | CCP-CAN [High] |
| 78 | Vehicle speed signal input |
| 79 | Sensor power (+5V) A/C Pressure Transducer (APT) |
| 80 | - |
| 81 | Sensor power (+5V) Accelerator Position Sensor (APS) #1 |
| 82 | Sensor power (+5V) Accelerator Position Sensor (APS) #2 |
| 83 | - |
| 84 | Fuel Level Sender (FLS) signal input |
| 85 | - |
| 86 | CVVT Oil Control Valve (OCV) [Bank 1/Intake] control output |
| 87 | - |
| 88 | Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] Heater control output |
| 89 | Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] Heater control output |
| 90 | Fuel Pressure Control Valve [Low] control output |
| 91 | Fuel Pressure Control Valve [High] control output |