Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2023 >> Kona N >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2022 Hyundai Kona N. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery (-) terminal.
  2. Disconnect the accelerator position sensor connector (A).
    G16186176Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation nuts (A) and then remove the accelerator pedal module.
G16186177Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals