Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2022 >> Tucson Plug-In Hybrid SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (Except HEV)) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine coolant temperature sensor (ECTS).

    (Refer to REMOVAL  Engine Coolant Temperature Sensor (ECTS) - "Removal")

  2. After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS terminals 1 and 2.
  3. Check that the resistance is within the specification.

    Specification  : Refer to "SPECIFICATION "

scientia non olet · About Mike's Workshop Manuals