Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2022 >> Tucson Plug-In Hybrid SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Automatic Transaxle Control System (Except HEV)) >> Transaxle Control Module (TCM) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Perform the oil pressure characteristics input procedure using the diagnostic tool when replacing with a new TCM.
    G14677269Courtesy of HYUNDAI MOTOR AMERICA
NOTE: Perform TCM learning after replacing the transaxle to prevent slow transaxle response, jerky acceleration and jerky startup. (Refer to Automatic Transaxle Control System - "REPAIR PROCEDURES ") Perform the procedures related in the ECM after replacing the TCM. (Refer to Engine Control / Fuel System - "ENGINE CONTROL MODULE (ECM) ")
scientia non olet · About Mike's Workshop Manuals