| Main Action |
|
- Poor contact of connector
- Leak in intake or exhaust system
- O2 Sensor (Down)
|
| Prerequisite Condition |
- Battery voltage is higher than 10.7V
- Engine speed is between 1200 RPM and 3520 RPM
- EGT around downstream O2S is higher than 300°C (572°F)
- Integrated Exhaust gas mass flow is higher than 6.1g/sec
- Delta exhaust gas mass flow is between -8.3g/sec and 41.7g/sec
- Fuel cut in
- Downstream O2S voltage before fuel cut is lower than 0.3V
|
| Threshold Value |
- Transient Time is higher than Threshold (Duration of O2 Sensor (Down) voltage from 0.3V3 during fuel cut in)
|
| Diagnostic Time |
|
| MIL |
|