Repair Procedures: Installation
- To install, reverse the removal procedure.
- Perform bleeding air procedure in the clutch system.
(Refer to Clutch System - "AIR BLEEDING PROCEDURE ")
NOTE:- If the oil seal on the transaxle case and clutch housing is damaged and fluid is leaking, replace the oil seal with a new oil seal. When installing the new oil seal, use the special service tool.
Item Special service tool Oil seal installer Handle Transaxle and clutch housing side
(Non apply in case by E-LSD)09453-3B400 09231-H1100 Transaxle case side
(In case by E-LSD)09453-3B400 09231-H1100 Clutch housing side
(In case by E-LSD)09430-2C800 09231-H1100
- If the oil seal on the transaxle case and clutch housing is damaged and fluid is leaking, replace the oil seal with a new oil seal. When installing the new oil seal, use the special service tool.