Circuit Inspection
| Item | Normal value | Prerequisite condition | (+) Probe | (-) Probe |
|---|---|---|---|---|
Signal Circuit: Resistance (Open)
|
Approx. below 1Ω |
|
CAN HIGH Terminal (ECM connector) | CAN HIGH Terminal (FPCM connector) |
| CAN LOW Terminal (ECM connector) | CAN LOW Terminal (FPCM connector) |
- Is the result within specifications?
YES
- Replace the FPCM with an usable one and check for proper operation. If the problem is corrected, replace the FPCM and then go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.