| Main Action |
|
- Poor connection
- Open or short power/ground in signal circuit
- S1
|
| Case 1 |
Prerequisite Conditions |
- Closed loop fuel control
- Fuel factor changes is higher than 0.1
|
| Threshold Value |
- The large gap between boost pressure and calculated low pressure occurs more than 6 times (30hpa during 1 sec.)
|
| Case 2 |
Prerequisite Conditions |
- Target lambda is between 0.97 and 1.03
- Integrated mass flow is higher than 0.3kg
|
| Threshold Value |
- Sensor voltage is between 1.49 and 1.51
|
| Case 3 |
Prerequisite Conditions |
|
| Threshold Value |
- S1 sensor voltage is lower than 0V
|
| Diagnostic Time |
|
| MIL |
|