Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Veloster N Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P2123-00: Accelerator Position Sensor 1 Signal Circuit High Input >> Component Inspection >> Accelerator Pedal Rod

Accelerator Pedal Rod

  1. Verify that the accelerator pedal operate freely without binding between full closed and wide open position by operating the accelerator pedal.
  2. Check for poor carpet fit under the accelerator controls pedal.
  3. Repair or replace as necessary and go to "Verification Of Repair " procedure. If OK, go to next step below.
scientia non olet · About Mike's Workshop Manuals