Power Circuit Inspection
| Check Item | Specifications | Prerequisite Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Power Circuit for short to GND - Resistance | Infinite (∞) |
|
APS1 power terminal of APS harness | Chassis GND |
- Is resistance within specification?
YES
- Go to next procedure.
NO
- Repair as necessary and go to "Verification Of Repair " procedure.
| Check Item | Specifications | Prerequisite Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Power Circuit for open - Voltage | Approx. 5V |
|
APS1 power terminal of APS harness | Chassis GND |
- Is voltage within specification?
YES
- Go to next procedure.
NO
- Repair as necessary and go to "Verification Of Repair " procedure.
| Check Item | Specifications | Prerequisite Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Signal Circuit for short to GND - Resistance | Infinite (∞) |
|
APS1 signal terminal of APS harness | Chassis GND |
- Is resistance within specification?
YES
- Go to next procedure.
NO
- Repair as necessary and go to "Verification Of Repair " procedure.
| Check Item | Specifications | Prerequisite Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Signal Circuit for open - Resistance | Below 1Ω |
|
Both ends of APS1 signal lines between ECM and APS harness | |
- Is resistance within specification?
YES
- Go to next procedure.
NO
- Repair as necessary and go to "Verification Of Repair " procedure.