Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Veloster 2.0, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Clutch System) >> Clutch Regulator >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedures.
  2. Perform bleeding air procedure in concentric slave cylinder after pouring the brake fluid.Gasoline 1.6 

    (Refer to Clutch System - "CONCENTRIC SLAVE CYLINDER ")

  3. Perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.Gasoline 2.0 

    (Refer to Clutch System - "CLUTCH RELEASE CYLINDER ")

scientia non olet · About Mike's Workshop Manuals