Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Sonata N Line >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System (Except HEV) >> ESC (Electronic Stability Control) Module >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. To install, reverse the removal procedure.
  2. After installation, bleed the brake system.

    (Refer to ESP (Electronic Stability Program) System - "ESC BLEEDING OF BRAKE SYSTEM ")

  3. Connect the GDS to the data link connector located underneath the dash panel.
  4. Conduct the Variant coding.
  5. Conduct the Auto Detected Sensor Calibration.
  6. Conduct the Longitudinal G Sensor Calibration.
  7. After replacing the ESP control module execute the "Assembly Check (ECU replacement)" of the additional function to check that the mounting is successful.
scientia non olet · About Mike's Workshop Manuals