Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Santa Fe Calligraphy, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System - 2.5L (Except HEV)) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2022 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  1. Install in the reverse order of removal.
  2. Reset the ECM adaptive values.
    G14534240Courtesy of HYUNDAI MOTOR AMERICA
    G14534241Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals