Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Santa Fe Calligraphy, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System - 2.5L (Except HEV)) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2022 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the diagnostic tool to the Data Link Connector (DLC).
  2. Turn the ignition switch ON.
  3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.

    Specification:  Refer to SPECIFICATION .

scientia non olet · About Mike's Workshop Manuals