Component Function: Cluster: Function
The cluster module controls a variety of functions installed on a control panel including MIL, trip computer, cluster text warning display, USM*, and sounds by receiving information through the CAN communication lines. It also functions the variant coding, which synchronizes the cluster settings with the vehicle's system specifications transmitted by GDS.
DTCs will set when the vehicle information from CAN BUS and that from EOL* do not correspond. On the assembly line, EOL* communication will terminate when any DTC is not detected through DTC search. At the service field, the cluster setting must be completed through variant coding using GDS in order to synchronize the vehicle information on GDS with that on the cluster.
| Component | Name_ETM | Description | ETM |
|---|---|---|---|
| Cluster | "INSTRUMENT CLUSTER" | Instrument Cluster | SD200-2 SD200-8 |
| 4WD | "4WD ECM" | 4 Wheel Drive | SD200-4 |
| IBU BCM TPMS SMK |
"IBU" | → [BCM+TPMS+SMK] Integrated Body control Unit → Body Control Module → Tire Pressure Monitoring System → SMart Key control module |
SD200-4 SD200-6 |
| ESP ABS EPB |
"ESP CONTROL MODULE" | → [ABS+ESP+EPB] Integrated Electronic Booster control module → Electronic Stability Program → Anti-lock Braking System → Electronic Parking Brake |
SD200-2 SD200-4 |
| LKAS | "LANE DEPARTURE WARNING UNIT" | Lane Keeping Assist System | SD200-2 |
| MDPS | "MDPS UNIT" | Motor Driven Power Steering | SD200-2 |
| SCC | "FRONT RADAR UNIT" | Smart Cruise Control | SD200-2 |
| SRSCM | "SRS CONTROL MODULE" | Supplemental Restraints System Control Module | SD200-2 |
| TCU | "PCM" | Transmission Control Unit | SD200-4 |
| "TCM" | |||
| eCall | "E-CALL UNIT" | Mobile Telematic System Emergency Call Module | SD200-8 |
| USM* | "User Settings" in the cluster, User Setting Mode | ||
| EOL* | End of Line | ||