Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Cluster Module Diagnosis) >> DTC B1000-51: Cluster Coding Not Programmed >> DTC Information and Inspection >> DTC Description

DTC Description

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.

B100051 is set when either Cluster* does not conduct variant coding or it does out of sync with the vehicle's system specifications after the vehicle is assembled or Cluster* is replaced. When this occurs, Cluster* LCD will display "Coding Error".

Cluster* will determine the state of each module through CAN BUS. When the modules do not correspond the variant coding information, a DTC will set.

When this DTC appears, perform the "Vehicle S/W Management" → "CLU Variant Coding" and arrange the vehicle's system specification settings. The DTC will be cleared when the programming completes properly.

scientia non olet · About Mike's Workshop Manuals