Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Power Windows) >> Power Window Motor >> Repair Procedures >> Inspection >> Front Power Window Motor

Front Power Window Motor

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim. (Refer to Body - "FRONT DOOR TRIM ")
  3. Disconnect the connector (A) from the motor. (A: Safety, B: Standard)
    G15473546Courtesy of HYUNDAI MOTOR AMERICA
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

    [Standard Window motor] 

    G15473547Courtesy of HYUNDAI MOTOR AMERICA
  5. Connect the terminal No. 2 and No. 3 to battery voltage (12V) and check that the motor operates smoothly when connecting the terminals below.

    [Safety Window motor] 

    G15473548Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals