Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Ioniq Plug-In Hybrid SEL >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Wheel (PHEV) >> Heated Steering Wheel >> Repair Procedures >> Removal And Installation >> Notes

Removal And Installation: Notes

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box.

    (Refer to Body - "GLOVE BOX UPPER COVER ASSEMBLY ")

  3. Remove the smart key unit.

    (Refer to Body - "SMART KEY UNIT ")

  4. Disconnect the body control module connectors (A).
    G13563736Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the body control module (A) after loosening the mounting nuts.
    G13563737Courtesy of HYUNDAI MOTOR AMERICA
  6. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals