Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2021 >> Accent SE, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (6 Of 6) >> DTC P2B5D-00: Engine Coolant Flow Control Valve Position Sensor Circuit >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

Item Normal value Prerequisite condition (+) Probe (-) Probe
TMM motor (+) Control Circuit: Resistance (Open) Below 1Ω
  1. Ignition switch: OFF
  2. TMM motor, ECM connector: Disconnected
TMM motor (+) Control Terminal (TMM motor connector) TMM motor (+) Control Terminal (ECM connector)
TMM motor (-) Control Circuit: Resistance (Open) Below 1Ω
  1. Ignition switch: OFF
  2. TMM motor, ECM connector: Disconnected
TMM motor (-) Control Terminal (TMM motor connector) TMM motor (-) Control Terminal (ECM connector)
Power Circuit: Voltage Approx. 5V
  1. Ignition switch: ON
  2. TMM motor connector: Disconnected
TMM motor (+) Control Terminal Chassis ground
Signal Circuit: Voltage Approx. 4V
  1. Ignition switch: ON
  2. TMM motor connector: Disconnected
TMM motor (-) Control Terminal Chassis ground
Ground Circuit: Resistance Below 1Ω
  1. Ignition switch: OFF
  2. TMM motor, ECM connector: Disconnected
TMM position sensor Ground Terminal (TMM motor connector) EGR Valve position sensor Ground Terminal (ECM connector)
  1. Is the result within specifications?

YES 

NO