Monitor DTC Status

Plug GDS to Data Link Connector (DLC).
1. Plug GDS to Data Link Connector (DLC).
2. Turn "ON" the ignition switch.
3. Select "Option Treatment" and click "Read VIN."
4. Are you able to confirm the VIN properly?
  YES
  - Go to "VERIFICATION OF VEHICLE REPAIR ".
  NO
  - Go to next step as below
Register the VIN
1. Plug GDS to Data Link Connector (DLC).
2. Turn "ON" the ignition switch.
3. Select "Option Treatment" and click "Write VIN."
4. Carefully read the VIN and then register the VIN in the GDS.