Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2020 >> Tucson Value, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 4WD Control Diagnosis >> DTC U0122: Lost Communication With Vehicle Dynamics Control Module >> Wiring Inspection >> Terminal And Connector Inspection

Terminal And Connector Inspection

  1. The electrical systems consist of a number of wires and connectors. Poor contact in harness and terminals can cause various problems and degrade components.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Any change in the value indicates poor contact of components. Was the connector a problem?

    YES 

    NO 

    • Go to next procedure.
scientia non olet · About Mike's Workshop Manuals