Motor Driven Power Steering System DTCS
WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
MOTOR DRIVEN POWER STEERING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | Battery Voltage High |
| DTC C1102 | Battery Voltage Low |
| DTC C1109 | Ignition Voltage Fault |
| DTC C1112 | Torque Sensor Supply Voltage Error |
| DTC C1259 | Steering Angle Sensor - Electrical Malfunction |
| DTC C1261 | Steering Angle Sensor Not Calibrated |
| DTC C1262 | Temperature Sensor Failure |
| DTC C1290 | Torque Sensor Signal Error |
| DTC C1603 | MDPS Thermal Protection |
| DTC C1604 | ECU Hardware Error |
| DTC C1611 | CAN Time - out ECM |
| DTC C1613 | Invalid Engine Status |
| DTC C1616 | CAN Bus Off |
| DTC C1622 | Vehicle Speed Signal Error |
| DTC C1633 | Cluster Invalid Displayed Speed |
| DTC C1692 | CAN Time - out VSM |
| DTC C1693 | CAN Signal Error VSM |
| DTC C1700 | Byte Coding Error |
| DTC C1702 | Variant Coding Error |
| DTC C1704 | ECU Fail - Safe Relay Fault |
| DTC C1705 | EPS Module (pre-charge circuit) Malfunction |
| DTC C1711 | Improper Program Termination |
| DTC C1804 | CAN time out LDWS |
| DTC C1805 | CAN Signal Failure LDWS |
| DTC C2400 | Motor Fault - Motor Not Running |
| DTC C2401 | Motor Circuit |
| DTC C2412 | Motor Short or Open |
| DTC C2413 | Motor Current Error |