Functions of Front View Camera

Front View Camera supports the following functions using recognition information (lane/light source/vehicle/pedestrian/traffic signs) and vehicle signal information (CAN Communication).

1. Lane Keeping Assist System (LKA): If it is judged that the vehicle leaves the road during driving, the driver is warned of the danger and the steering is controlled in order to prevent the accident. The LKA provides visual/audible/tactile warning to the driver if it is determined that the lane departs from the lane in consideration of the lane and road boundary information recognized by the MFC and whether or not the turn signal lamp operates.

   However, the MFC may not operate normally in the limit situation where the lane and road boundaries can not be recognized.

2. Smart High Beam (SHB): Control the operation of the high beam of the vehicle in order to maximize the forward viewing distance while minimizing the glare of the other driver in the nighttime and low light conditions. The SHB recognizes whether the light source of preceding vehicle/oncoming vehicle/street light is using the MFC, turns off the high beam when there is a light source, and turns on the high beam when there is no light source. However, if the MFC can not recognize the surrounding situation, it may not operate normally.
3. Autonomous Emergency Braking (AEB): It warns the driver of the risk and controls the braking of the vehicle to prevent collision with front obstacle during driving. (If Sensor Fusion AEB is equipped) The MFC transmits the recognition information about the forward vehicle/pedestrian to the front radar using CAN communication for AEB operation.