Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Sonata Limited 2.0T >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L (Except HEV) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Throttle Position Sensor (TPS)

Throttle Position Sensor (TPS)

  1. Connect the GDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T.. and W.O.T.

    Specification  : Refer to "SPECIFICATION "

  3. Turn the ignition switch OFF and disconnect the Scantool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification  : Refer to "SPECIFICATION "