Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Power Windows) >> Power Window Switch >> Repair Procedures >> Removal >> Driver Power Window Switch

Driver Power Window Switch

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Remove the power window bezel assembly (A) after loosening the mounting screws.
    G12999333Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power window switch assembly (A) after loosening the mounting screws.
    G12999334Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals