Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Power Windows) >> Power Window Switch >> Repair Procedures >> Removal >> Assist Power Window Switch

Assist Power Window Switch

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Remove the power window switch assembly (A) after loosening the mounting screws.
    G12999335Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals