Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Body Control Module Diagnosis) >> DTC B1810-00: UIP Sensor Error >> Verification Of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.

After repair, it is essential to verify whether the faults have been corrected.

  1. Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
  2. Erase the DTCs and test the vehicle according to the DTC Setting Condition in DTC Information.
  3. Did the same DTC return?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • The system is running properly in line with the specifications at this time.
scientia non olet · About Mike's Workshop Manuals