Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Electronic Stability Program (Esp) System) >> Downhill Brake Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the floor console upper cover.

    (Refer to Body - "CRASH PAD ")

  3. Disconnect the DBC switch connector (A).
    G12996087Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the DBC switch (A) after loosening the screw.
    G12996088Courtesy of HYUNDAI MOTOR AMERICA
    G12996089Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals