Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.4L (2 Of 3) >> DTC P061B-00: Internal Control Module Torque Calculation Performance >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Level 2 monitoring (=Process monitoring)
  1. Poor Connector Connection
  2. Faulty PCM
Enable Condition
  • Engine speed during engine start is higher than 32 RPM
Threshold Value
  • Torque difference between actual and set point (Torque difference is higher than threshold value)
Diagnostic Time
  • 0.48s.
MIL ON Condition
  • 1 driving cycle
scientia non olet · About Mike's Workshop Manuals